Machine Control Panel Menu - Siemens SINUMERIK 840D sl Operating Manual

16.3

Machine control panel menu

Here you select keys from the machine control panel which are reproduced by the software
by touch operation of the relevant softkeys.
See chapter "Controls on the machine control panel" for a description of the individual keys.
Note
PLC interface signals that are triggered via the softkeys of the machine control panel menus
are edge triggered.
Showing and hiding
The user menu key "U" displays the CPF softkey bar (vertical softkey bar) and the user
softkey bar (horizontal softkey bar).
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
You can expand the user softkey bar to display eight additional softkeys via
the menu forward key.
You use the "Back" softkey to hide the menu bar again.
16.3 Machine control panel menu
HT 8
681