Siemens SINUMERIK 840D sl Operating Manual page 252

Creating a ShopMill program
7.1 Program views
Parameter screen with help display
Figure 7-3
The animated help displays are always displayed with the correct orientation to the selected
coordinate system. The parameters are dynamically displayed in the graphic. The selected
parameter is displayed highlighted in the graphic.
The color symbols
Red arrow = tool traverses in rapid traverse
Green arrow = tool moves with the machining feedrate
252
Press the <Cursor right> key to open a selected program block or
cycle in the work plan.
The associated parameter screen with help screen is then
displayed.
Parameter screen with help display
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling