Displaying Energy Consumption - Siemens SINUMERIK 840D sl Operating Manual

Ctrl-Energy

17.2 Displaying energy consumption

17.2 Displaying energy consumption
You have the option of displaying the actual energy consumption values of the individual
axes and the total energy consumption.
Display
Manual
Sentron PAC
Total, drives
Total, machine
The display in the table depends on the configuration.
References
Information on the configuration is provided in the following reference:
System Manual "Ctrl-Energy", SINUMERIK 840D sl / 828D
Procedure
686
Meaning
No input
•
Entering and displaying a fixed value
•
Displaying a value from a data source
•
Displaying an actual value measured by a SENTRON PAC device.
Display of the total of all measured drive values.
Addition of the values of all axes as well as a fixed value and Sentron
PAC.
1. Select the "Parameter" operating area and press the "Ctrl-Energy" softkey.
- OR -
+ Press the <Ctrl> + <E> keys.
2. Press the "Energy analysis" softkey.
The "SINUMERIK Ctrl-Energy Analysis" window opens.
You obtain a display of the actual active power for all of the axes.
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling