Programming technological functions (cycles)
8.2 Milling
Procedure
Parameters, G code program
PL
Machining plane
Milling direction
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Parameter
Description
FZ
Depth infeed rate (only for ∇ and ∇∇∇)
(only for ShopMill)
FZ
Depth infeed rate (only for ∇ and ∇∇∇)
(only for G code)
Machining
∇ (roughing)
•
∇∇∇ (finishing)
•
∇∇∇ edge (edge finishing)
•
Chamfering
•
Circular pattern
Full circle
•
The circumferential slots are positioned around a full circle. The distance from one
circumferential slot to the next circumferential slot is always the same and is
calculated by the control.
Pitch circle
•
The circumferential slots are positioned around a pitch circle. The distance from
one circumferential slot to the next circumferential slot can be defined using angle
α2.
362
1.
The part program or ShopMill program to be processed has been
created and you are in the editor.
2.
Press the "Milling" softkey.
3.
Press the "Groove" and "Circumferential groove" softkeys.
The "Circumferential Groove" input window opens.
mm
mm
*
Parameters, ShopMill program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
mm/min
mm/tooth
rpm
m/min
Unit
mm/min
in/tooth
*
Milling