Switching The Collision Avoidance On And Off - Siemens SINUMERIK 840D sl Operating Manual

Collision avoidance (only 840D sl)

10.2 Switching the collision avoidance on and off

10.2 Switching the collision avoidance on and off
Using "Settings", you have the option of separately activating or deactivating the collision
monitoring for the Machine operating area (operating modes, AUTO, JOG and MDI)
separately for the machine and tools.
Using machine data, you define from which protection level the collision monitoring for the
machine or the tool can be activated or deactivated in the operating modes JOG/MDI or
AUTO.
Setting
JOG/MDI operating mode
Collision avoidance
AUTO mode
Collision avoidance
JOG/MDI
Machine
AUTO
Machine
JOG/MDI
Tools
AUTO
Tools
520
3. Press the "Sim. rec." softkey.
4. Press the "Other views" and "Machine space" softkeys.
During simultaneous recording, an active machine model is displayed.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Effect
They switch the collision monitoring for the operating modes JOG/MDI
completely on or off.
They switch the collision monitoring for the operating mode AUTO
completely on or off.
If the collision monitoring for the JOG/MDI operating modes is
activated, then as a minimum, the
machine protection areas are monitored.
The parameter cannot be changed.
If the collision monitoring for the AUTO operating mode is activated,
then as a minimum, the
machine protection areas are monitored.
The parameter cannot be changed.
They switch the collision monitoring of the tool protection areas for the
operating modes JOG/MDI on or off.
They switch the collision monitoring of the tool protection areas for the
operating mode AUTO on or off.
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling