3.1.2 How to set the Independent mode
3.1.3 Startup Configuration
To configure startup, select the [System Configuration] from the Setup Menu.
The Startup section has pages for Start Mode, Auto Start, and Windows Login.
3.1.4 Start Mode
This page has settings for the EPSON RC+ 6.0 start mode.
There are two start modes:
Program
Auto
Use the Password button to change the start mode password.
Safety and Installation (RC620 / EPSON RC+ 6.0) Rev.12
(1) Select the Setup | System Configuration from the main menu and
displays the [System Configuration] dialog as shown below.
(2) Select the SPEL Controller Board | Preferences.
(3)
(3) Set the [Independent mode] checkbox.
(4) Click the Apply button.
(5) Click the Close button.
This mode allows you to develop your projects. This is the default
startup mode.
This mode starts the system and displays the Operator Window.
(2)
3. First Step
(5)
(4)
179