Epson RC620 Safety And Installation page 61

Location
D
E
F
G
H
Safety and Installation (RC620 / EPSON RC+ 6.0) Rev.12
Label
Hazardous voltage exists while the Manipulator
is ON. To avoid electric shock, do not touch
any internal electric parts.
Make sure to use the designated lithium battery.
Refer to Controller Manual
Maintenance 14. Maintenance parts list
Note
Weight of the unit is indicated
on the Signature label Make
sure to check the weight before
units transfer or relocation and
prevent throwing out your back
at holding the unit. Also, make
sure to keep your hands,
fingers, and feet safe from
being caught or serious injury.
1. Safety
47