Labels; Controller - Epson RC620 Safety And Installation

1.6 Labels

Labels are attached around the locations of the Controller and Manipulator where
specific dangers exist.
Be sure to comply with descriptions and warnings on the labels to operate and
maintain the Robot system safely.
Do not tear, damage, or remove the labels. Use meticulous care when handling
those parts or units to which the following labels are attached as well as the nearby
areas:
Label types differ according to the specifications.

1.6.1 Controller

Location
A
Safety and Installation (RC620 / EPSON RC+ 6.0) Rev.12
Label Note
Residual voltage exists.
avoid electric shock, do not open
the cover while the Power is ON,
or for 3 minutes after the Power
is OFF.
Residual voltage exists.
avoid electric shock, do not open
the cover while the Power is ON,
or for 300 seconds after the
Power is OFF.
1. Safety
To
To
45