Start Mode: Auto; Auto Start - Epson RC620 Safety And Installation

3.1.7 Start Mode: Auto

Auto mode displays the Operator Window. The Operator Window is configured
according to the settings in Project | Properties.
The current controller Control Device sets the mode of Auto operation.
Control Device
Self
Remote I/O

3.1.8 Auto Start

You can configure EPSON RC+ 6.0 to automatically start when Windows starts.
From the Setup | System Configuration | Auto Start page, set the Start EPSON
RC+ 6.0 after Windows start check box.
In addition, if you set the checkbox above, you can specify EPSON RC+ 6.0
command line options (/auto, /nosplash, etc.) in the Command line options text
box. Refer to the EPSON RC+ 6.0 Users Guide: 4.2.10 Command Line Options.
You can also specify if the main function should automatically be started after a
delay.
startup.
NOTE When using auto start, ensure that your application can automatically start safely

and inform operators how to abort the startup.
Safety and Installation (RC620 / EPSON RC+ 6.0) Rev.12
The Operator Window can be used as a simple operator
interface for production.
The Operator window is displayed with no operator buttons
to allow any diagnostic messages to be viewed.
During the delay, the operator can click Stop to abort the automatic
Description
3. First Step
181