Enabling The Sftp Server Function; Configuring Netconf Over Ssh; Configuring The User Lines For Ssh Login - HP 5920 Series Configuration Manual

Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

Enabling the SFTP server function

This SFTP server function enables clients to log in to the device through SFTP.
To enable the SFTP server function:
Step
1.
Enter system view.
2.
Enable the SFTP server
function.

Configuring NETCONF over SSH

This function is available in Release 231 1P04 and later versions.
This function allows users to use to perform NETCONF operations on the device through a
NETCONF-over-SSH connection.
When the device acts as a server in the NETCONF-over-SSH connection, connection requests initiated by
SSH1 clients are not supported.
For more information about NETCONF over SSH commands, see Network Management and
Monitoring Command Reference.
To configure NETCONF over SSH:
Step
1.
Enter system view.
2.
Enable NETCONF over
SSH.
3.
Specify a port to listen for
NETCONF-over-SSH
connections.

Configuring the user lines for SSH login

Depending on the SSH application, an SSH client can be an Stelnet, SFTP, SCP, or NETCONF-over-SSH
client.
Only Stelnet and NETCONF-over-SSH clients require the user line configuration. The user line
configuration takes effect on the clients at the next login.
To configure the user lines for Stelnet and NETCONF-over-SSH clients:
Step
1.
Enter system view.
2.
Enter VTY user line view.
Command
system-view
sftp server enable
Command
system-view
netconf ssh server enable
netconf ssh server port port-number
Command
system-view
line vty number [ ending-number ]
274
Remarks
N/A
By default, the SFTP server function
is disabled.
Remark
N/A
By default, NETCONF over SSH is
disabled.
By default, port 830 listens for
NETCONF-over-SSH connections.
Remarks
N/A
N/A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 series

Table of Contents