Ssh2.0 Configuration Commands; Ssh2.0 Server Configuration Commands; Display Ssh Server - HP 3600 v2 Series Command Reference Manual

SSH2.0 configuration commands

SSH2.0 server configuration commands

display ssh server

Syntax
display ssh server { session | status } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
session: Displays the session information of the SSH server.
status: Displays the status information of the SSH server.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ssh server command on an SSH server to display SSH server status information or session
information.
Related commands: ssh server authentication-retries, ssh server authentication-timeout, ssh server
compatible-ssh1x enable, ssh server enable, and ssh server rekey-interval.
NOTE:
This command is also available on an SFTP server.
Examples
# Display the SSH server status information.
<Sysname> display ssh server status
SSH Server: Disable
SSH version : 1.99
SSH authentication-timeout : 60 second(s)
SSH server key generating interval : 0 hour(s)
SSH Authentication retries : 3 time(s)
SFTP Server: Disable
249