Portal Max-User; Portal Move-Mode Auto - HP 3600 v2 Series Command Reference Manual

[Sysname] portal local-server ip 1.1.1.1

portal max-user

Syntax
portal max-user max-number
undo portal max-user
View
System view
Default level
2: System level
Parameters
max-number: Specifies the maximum number of online portal users allowed in the system. The value is in
the range of 1 to 1024
Description
Use the portal max-user command to set the maximum number of online portal users allowed in the
system.
Use the undo portal max-user command to restore the default.
By default, the maximum number of portal users allowed on the switch is 1024.
If the maximum number of portal users specified in the command is less than that of the current online
portal users, the command can be executed successfully and will not impact the online portal users, but
the system will not allow new portal users to log in until the number drops down below the limit.
Examples
# Set the maximum number of portal users allowed in the system to 100.
<Sysname> system-view
[Sysname] portal max-user 100

portal move-mode auto

Syntax
portal move-mode auto
undo portal move-mode
View
System view
Default level
2: System level
Parameters
None
Description
Use the portal move-mode auto command to enable support for portal user moving. Then, if an
authenticated user moves from a port of the device to another port of the device without logging off, the
155