Telnet Server Ipv6 Port; Telnet Server Port - HP Enterprise FlexFabric 12900E Series Command Reference Manual

Predefined user roles
network-admin
Parameters
dscp-value
Usage guidelines
The DSCP value is carried in the Traffic class field of an IPv6 packet to indicate the packet
transmission priority.
Examples
# Set the DSCP value for IPv6 to use for outgoing Telnet packets to 30 on a Telnet server.
<Sysname> system-view
[Sysname] telnet server ipv6 dscp 30

telnet server ipv6 port

Use
telnet server ipv6 port
Use
undo telnet server ipv6 port
Syntax
telnet server ipv6 port port-number
undo telnet server ipv6 port
Default
The IPv6 Telnet service port number is 23.
Views
System view
Predefined user roles
network-admin
Parameters
port-number
Usage guidelines
This command terminates all existing Telnet connections to the IPv6 Telnet server. To use the Telnet
service, users must reestablish Telnet connections.
Examples
# Set the IPv6 Telnet service port number to 1026.
<Sysname> system-view
[Sysname] telnet server ipv6 port 1026

telnet server port

Use telnet server port
Use
undo telnet server port
Syntax
telnet server port port-number
: Specifies a DSCP value in the range of 0 to 63.
: Specifies a port number. The value can be 23 or in the range of 1025 to 65535.
to specify the IPv4 Telnet service port number.
to specify the IPv6 Telnet service port number.
to restore the default.
to restore the default.
79