Setting The Maximum Number Of Concurrent Login Users; Configuring A Nas-Id Profile - HP FlexFabric 5700 Series Security Configuration Manual

Setting the maximum number of concurrent login
users
Perform this task to set the maximum number of concurrent users who can log on to the device through a
specific protocol, regardless of their authentication methods. The authentication methods include no
authentication, local authentication, and remote authentication.
To set the maximum number of concurrent login users:
Step
1. Enter system view.
2. Set the maximum number of
concurrent login users.

Configuring a NAS-ID profile

By default, the device sends its device name in the NAS-Identifier attribute of any RADIUS requests.
A NAS-ID profile enables you to send different NAS-Identifier attribute strings in RADIUS requests from
different VLANs. The strings can be organization names, service names, or any user categorization
criteria, depending on the administrative requirements.
For example, map the NAS-ID companyA to all VLANs of company A. The device will send companyA
in the NAS-Identifier attribute for the RADIUS server to identify requests from any Company A users.
You can apply a NAS-ID profile to portal- or port security-enabled interfaces. For more information, see
"Configuring portal" and
A NAS-ID can be bound with more than one VLAN, but a VLAN can be bound with only one NAS-ID.
To configure a NAS-ID profile:
Step
1. Enter system view.
2.
3.
Command
system-view
•
•
"Configuring port
Command
system-view
Create a
NAS-ID profile
and enter
aaa nas-id profile profile-name
NAS-ID profile
view.
Configure a
NAS-ID and
nas-id nas-identifier bind vlan vlan-id
VLAN binding
in the profile.
In non-FIPS mode:
aaa session-limit { ftp | http |
https | ssh | telnet }
max-sessions
In FIPS mode:
aaa session-limit { https | ssh }
max-sessions
security."
47
Remarks
N/A
By default, the maximum number of
concurrent login users is 32 for
each user type.
Remarks
N/A
N/A
By default, no NAS-ID and VLAN
binding exists.