Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command resets the TCP connection with
the specified MSDP peer and clears statistics for the MSDP peer on the public network.
peer-address: Specifies an MSDP peer by its IP address. If you do not specify an MSDP peer, the
command resets the TCP connections with all MSDP peers.
Examples
# On the public network, reset the TCP connection with the MSDP peer 125.10.7.6, and clear all statistics
for this MSDP peer.
<Sysname> reset msdp peer 125.10.7.6
reset msdp sa-cache
Use reset msdp sa-cache to clear (S, G) entries from the SA cache.
Syntax
reset msdp [ vpn-instance vpn-instance-name ] sa-cache [ group-address ]
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command clears (S, G) entries from the
SA cache on the public network.
group-address: Specifies a multicast group address in the range of 224.0.1.0 to 239.255.255.255. If you
do not specify a multicast group, the command clears the cached (S, G) entries for all multicast groups
from the SA cache.
Examples
# Clear the (S, G) entries for the multicast group 225.5.4.3 from the SA cache on the public network.
<Sysname> reset msdp sa-cache 225.5.4.3
Related commands
cache-sa-enable
•
•
display msdp sa-cache
reset msdp statistics
Use reset msdp statistics to clear statistics for the specified MSDP peer without resetting the TCP
connection with the MSDP peer.
181