Primary Authentication (Radius Scheme View) - HP 3600 v2 Series Command Reference Manual

Use the undo primary accounting command to remove the configuration.
By default, no primary RADIUS accounting server is specified.
The IP addresses of the accounting servers and those of the authentication/authorization servers must be
of the same IP version.
The IP addresses of the primary and secondary accounting servers must be different from each other;
otherwise, the configuration fails.
If the specified server resides on an MPLS L3VPN, specify the VPN by using the vpn-instance
vpn-instance-name option.
If you change the primary accounting server when the switch has already sent a start-accounting request
to the server, the communication with the primary server will time out, and the switch will look for a server
in active state from the new primary server on.
If you remove an accounting server being used by users, the switch cannot send real-time accounting
requests and stop-accounting requests anymore for the users, and does not buffer the stop-accounting
requests.
NOTE:
The shared key configured by this command takes precedence over that configured by using the key
•
accounting [ cipher | simple ]
The VPN specified by this command takes precedence over the VPN specified for the RADIUS scheme.
•
Related commands: key and vpn-instance (RADIUS scheme view).
Examples
# For RADIUS scheme radius1, set the IP address of the primary accounting server to 10.1 10.1.2, the UDP
port to 1813, and the shared key to the plaintext string IT8Q4sHnitM=, and specify to display the key in
cipher text.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] primary accounting 10.110.1.2 1813 key cipher IT8Q4sHnitM=

primary authentication (RADIUS scheme view)

Syntax
primary authentication { ipv4-address | ipv6 ipv6-address } [ port-number | key [ cipher | simple ] key
| vpn-instance vpn-instance-name ] *
undo primary authentication
View
RADIUS scheme view
Default level
2: System level
Parameters
ipv4-address: IPv4 address of the primary authentication/authorization server.
ipv6 ipv6-address: IPv6 address of the primary authentication/authorization server.
key
command.
54