Chapter 4: Gui Commands - Centrecom FS980M/9 Command Reference Manual

4
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
the GUI. For more information, see the
Command List •
•
•
•
•
613-50137-01 Rev A
GUI Commands
"atmf topology-gui enable" on page 161
"gui-timeout" on page 162
"log event-host" on page 164
"service http" on page 165
"show http" on page 166
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Getting Started with Alliedware Plus
160