S
C
M
YSTEM
ONFIGURATION AND
SHOW SYSTEM MAC
show system mac
Overview
This command displays the physical MAC address available on a standalone
switch, or a stack. This command also shows the virtual MAC address for a stack if
the stack virtual MAC address feature is enabled with the
stack enable
show system mac
Syntax
Mode
User Exec and Privileged Exec
Usage
For more information about the virtual MAC address feature, see the
Feature Overview and Configuration
Example
To display the physical MAC address enter the following command:
awplus#
Output
Figure 5-19: Example output from the show system mac command
Output
Figure 5-20: Example output showing how to use the stack virtual-mac
Related
stack virtual-mac
Commands
613-50137-01 Rev A
C
ONITORING
OMMANDS
command.
show system mac
awplus#show system mac
eccd.6d9d.4eed (system)
command and the show system mac command
awplus#configure terminal
Enter configuration commands, one per line.
awplus(config)#stack virtual-mac
% Please check that the new MAC 0000.cd37.0065 is unique within
the network.
% Save the config and restart the system for this change to take
effect.
Member1#copy run start
Building configuration...
[OK]
Member1#reload
reboot system? (y/n): y
... Rebooting at user request ...
Loading default configuration ....
awplus login: manager
Password:
awplus>show system mac
eccd.6d9d.4eed
Virtual MAC Address 0000.cd37.0065
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
stack virtual-mac
Guide.
End with CNTL/Z.
or the
VCStack
218