P
C
C
LUGGABLES AND
ABLING
OMMANDS
SHOW SYSTEM PLUGGABLE DIAGNOSTICS
Table 3: Parameters in the output from the show system pluggables
Related
show system environment
Commands
show system pluggable
show system pluggable detail
613-50137-01 Rev A
diagnostics command
Parameter
Description
Temp (Degrees C)
Shows the temperature inside the transceiver.
Vcc (Volts)
Shows voltage supplied to the transceiver.
Tx Bias (mA)
Shows current to the Laser Diode in the transceiver.
Tx Power (mW)
Shows the amount of light transmitted from the transceiver.
Rx Power (mW)
Shows the amount of light received in the transceiver.
Rx LOS
Rx Loss of Signal. This indicates whether:
• light is being received (Rx Up) and therefore the link is up, or
• light is not being received (Rx Down) and therefore the link is
down
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
234