Advertisement
S
C
M
YSTEM
ONFIGURATION AND
(
)
BANNER LOGIN
SYSTEM
banner login (system)
Overview
This command configures the login banner that is displayed on the console when
you login. The login banner is displayed on all connected terminals. The login
banner is displayed after the MOTD (Message-of-the-Day) banner and before the
login username and password prompts.
Use the no banner login command to disable the login banner.
banner login
Syntax
no banner login
Default
By default, no login banner is displayed at console login.
Mode
Global Configuration
Examples
To configure a login banner of "Authorised users only" to be displayed when you
login, enter the following commands:
To remove the login banner, enter the following commands:
613-50137-01 Rev A
C
ONITORING
OMMANDS
awplus#configure terminal
awplus(config)#banner login
Type CNTL/D to finish.
Authorised users only
awplus(config)#exit
awplus#exit
authorised users only
awplus login: manager
Password:
AlliedWare Plus (TM) 5.4.6-1 09/30/16 13:03:59
awplus>
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
171
Advertisement
Troubleshooting
