Advertisement
L
C
OGGING
OMMANDS
LOG BUFFERED
log buffered
Overview
This command configures the device to store log messages in RAM. Messages
stored in RAM are not retained on the device over a restart. Once the buffered log
reaches its configured maximum allowable size old messages will be deleted to
make way for new ones.
log buffered
Syntax
no log buffered
Default
The buffered log is configured by default.
Mode
Global Configuration
Examples
To configured the device to store log messages in RAM use the following
commands:
awplus#
awplus(config)#
To configure the device to not store log messages in a RAM buffer use the
following commands:
awplus#
awplus(config)#
Related
clear log buffered
Commands
default log buffered
log buffered (filter)
log buffered size
log buffered exclude
show log
show log config
613-50137-01 Rev A
configure terminal
log buffered
configure terminal
no log buffered
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
249
Advertisement
Troubleshooting
