Default Log Console - Centrecom FS980M/9 Command Reference Manual

L C
OGGING OMMANDS

DEFAULT LOG CONSOLE

default log console
Overview This command restores the default settings for log messages sent to the terminal
when a
console when a log console command is issued.
default log console
Syntax
Mode Global Configuration
Example To restore the log console to its default settings use the following commands:
awplus#
awplus(config)#
Related log console
Commands
log console (filter)
log console exclude
show log config
613-50137-01 Rev A
log console command is issued. By default all messages are sent to the
configure terminal
default log console
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
244