Service Http; No Service Http - Centrecom FS980M/9 Command Reference Manual

GUI C
OMMANDS

SERVICE HTTP

service http
Overview Use this command to enable the HTTP (Hypertext Transfer Protocol) service. This
service, which is enabled by default, is required to support the AlliedWare Plus™
GUI Java applet on a Java enabled browser.
Use the no variant of this command to disable the HTTP feature.
Syntax service http

no service http

Default Enabled
Mode Global Configuration
Validation show running-config
Commands
613-50137-01 Rev A Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
165