Privilege Level - Centrecom FS980M/9 Command Reference Manual

U A C
SER CCESS OMMANDS

PRIVILEGE LEVEL

privilege level
Overview This command sets a privilege level for VTY or console connections. The
configured privilege level from this command overrides a specific user's initial
privilege level at the console login.
privilege level <1-15>
Syntax
Mode Line Configuration
Usage You can set an intermediate CLI security level for a console user with this command
by applying privilege level 7 to access all show commands in Privileged Exec and
all User Exec commands. However, intermediate CLI security will not show
configuration commands in Privileged Exec.
Examples To set the console connection to have the maximum privilege level, use the
following commands:
awplus#
awplus(config)#
awplus(config-line)#
To set all VTY connections to have the minimum privilege level, use the following
commands:
awplus#
awplus(config)#
awplus(config-line)#
To set all VTY connections to have an intermediate CLI security level, to access all
show commands, use the following commands:
awplus#
awplus(config)#
awplus(config-line)#
Related enable password
Commands
line
show privilege
username
613-50137-01 Rev A
configure terminal
line console 0
privilege level 15
configure terminal
line vty 0 5
privilege level 1
configure terminal
line vty 0 5
privilege level 7
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
138