Show Reboot History - Centrecom FS980M/9 Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW REBOOT HISTORY

show reboot history
Overview Use this command to display the device's reboot history.
show reboot history [<stack-ID>]
Syntax
Mode User Exec and Privileged Exec
Example To show the reboot history of stack member 2, use the command:
awplus#
Output Figure 5-14: Example output from the show reboot history command
awplus#show reboot history 2

Stack member 2:

<date> <time>
-----------------------------------------------
2016-10-10 01:42:04
2016-10-10 01:35:31
2016-10-10 01:16:25
failure!
2016-10-10 01:11:04
failure!
2016-10-09 20:46:40
2016-10-09 19:56:16
2016-10-09 20:36:06
reboot prevention)
2016-10-09 19:51:20
Table 6: Parameters in the output from the show reboot history command
Related show tech-support
Commands
613-50137-01 Rev A
C
ONITORING OMMANDS
Parameter
<stack-ID>
show reboot history 2
<type> <description>
Expected User Request
Expected User Request
Rebooting due to critical process (network/nsm) 
Unexpected
Rebooting due to critical process (network/nsm) 
Unexpected
Unexpected Rebooting due to VCS duplicate member-ID
Expected User Request
Rebooting due to VCS duplicate master (Continuous 
Unexpected
Expected User Request
Parameter
Unexpected
Expected
User request
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
Stack member number, from 1 to 8.
Description
A non-intended reboot.
A planned or user-triggered reboot.
User initiated reboot via the CLI.
213