Table of Contents
Advertisement
Chapter 16
Displaying the IPX Route Table
Displaying IPX Route Table Statistics
16-20
To display the IPX route table:
1. Perform an IPX Route Table search as described in
Route
Table." If available routes are found they are displayed in the IPX
Route Table Web page.
2. See
Table 16-8
to review your configuration:
Table 16-8. IPX Route Table Parameters
Parameter
Select
Network
Interface
Source
TTL
Ticks
Hops
Next-Hop MAC
Address
To display your IPX route table statistics:
1. In the navigation pane, expand the Routing > IPX > Display folders,
and then click Route Table Statistics.
The IPX Route Table Statistics Web page is displayed in the content
pane. See
Figure
16-14.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Defines the...
Parameter selected.
Network number (in hex) of the IPX network.
Interface associated with the IPX network.
Method by which the network was learned. For example,
RIP, local, or static.
Number of seconds before the route expires.
Amount of time (in ticks) that the packet takes to reach
the network number you specified. A tick is
approximately 1/18th of a second.
Number of routers (hops) that the packet must pass
through before reaching the network number associated
with the IPX network.
MAC address of the next destination through which the
network is reached.
"Searching the IPX
Advertisement
Table of Contents
