Siemens SINUMERIK 828D Operating Manual page 43

Parameters operating area
Tool management lists
Diagnostics operating area
Startup operating area
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Protection level
Key switch 3
(protection level 4)
Protection level
Keyswitch 3
(protection level 4)
End user
(protection level 3)
End user
(protection level 3)
Manufacturer
(protection level 1)
End user
(protection level 3)
Service
(protection level 2)
Protection levels
End user
(protection level 3)
Keyswitch 3
(protection level 4)
Key switch 3
...
(protection level 4)
Key switch 3
(protection level 4)
Keyswitch 3
(protection level 4)
Service
(protection level 2)
Introduction
1.4 User interface
43