Program Structure - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Figure 7-4
7.2
Program structure
A machining step program is divided into three sub-areas:
● Program header
● Program blocks
● End of program
These sub-areas form a work plan.
Program header
The program header contains parameters that affect the entire program, such as blank
dimensions or retraction planes.
Program blocks
You determine the individual machining steps in the program blocks. In doing this, you
specify the technology data and positions, among other things.
Linked blocks
For the "Contour milling", "Milling", and "Drilling" functions, program the technology blocks
and contours or positioning blocks separately. These program blocks are automatically
linked by the control and connected by brackets in the work plan.
In the technology blocks, specify how and in what form the machining should take place, e.g.
centering first, and then drilling. In the positioning blocks, you define the positions for drilling
or milling operations.
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Parameter screen with programming graphics
Creating a ShopMill program
7.2 Program structure
191
Advertisement
Table of Contents
