Siemens SINUMERIK 828D Operating Manual page 188

Creating a ShopMill program
7.1 Program views
Machining schedule
The work plan in the editor provides an overview of the individual machining steps of a
program.
Figure 7-1
188
Machining schedule of a ShopMill program
1. You can move between the program blocks in the machining
schedule using the <Cursor up> and <Cursor down> keys.
2. Press the "Graphics view" softkey to display the programming
graphics.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling