Siemens SINUMERIK 828D Operating Manual page 151
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
You can display status information for diagnosing synchronized actions in the "Synchronized
Actions" window.
You get a list with all currently active synchronized actions.
In this list, the synchronized action programming is displayed in the same form as in the part
program.
You can see the status of the synchronized actions in the "Status" column.
● Waiting
● Active
● Blocked
Non-modal synchronized actions can only be identified by their status display. They are only
displayed during execution.
Synchronization types
Synchronization types
ID=n
IDS=n
Without ID/IDS
Note
Numbers ranging from 1 to 254 can only be assigned once, irrespective of the identification
number.
Procedure
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Meaning
Modal synchronized actions in automatic mode, local to program; n = 1 to
254
Static synchronized actions in all modes, n = 1 to 254
Non-modal synchronized actions in automatic mode
1.
Select the "Machine" operating area.
2.
Press the <AUTO> key.
3.
Press the menu forward key and the "Synchron." softkey.
The "Synchronized Actions" window appears.
4.11 Displaying G Functions and Auxiliary Functions
Machining the workpiece
151
Advertisement
Table of Contents
