Siemens SINUMERIK 828D Operating Manual page 217

Parameters, G code program
PL Machining plane
RP Retraction plane
SC Safety clearance
Parameter Description
Single position
Machining •
position (only
Drill hole at programmed position
for G code)
Position pattern
•
Position with MCALL
Z0 (only for G Reference point Z
code)
Diameter (centered with reference to the diameter)
Centering •
The angle for the center drill entered in the tool list is applied.
Tip (centered with reference to the depth)
•
The drill is inserted into the workpiece until the programmed insertion depth is
reached.
∅ It is inserted into the workpiece until the diameter is correct. - (for diameter centering
only)
Z1 Drilling depth (abs) or drilling depth in relation to Z0 (inc)
It is inserted into the workpiece until it reaches Z1 - (for tip centering only)
Dwell time (at final drilling depth) in seconds
DT •
Dwell time (at final drilling depth) in revolutions
•
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Parameters, ShopMill program
T
mm D
mm F
S / V
Programming technological functions (cycles)
Tool name
Cutting edge number
Feedrate
Spindle speed or constant
cutting rate
8.1 Drilling
mm/min
mm/rev
rpm
m/min
Unit
mm
mm
mm
mm
s
rev
217