Displaying Simulation Alarms - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
5.9
Displaying simulation alarms
Special alarms might occur during simulation. If an alarm occurs during a simulation run, a
window opens in the operating window to display it.
The alarm overview contains the following information:
● Date and time
● Deletion criterion
● Alarm number
● Alarm text
Requirement
Simulation is running and an alarm is active.
Procedure
Acknowledgement symbols
Symbol
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Specifies with which softkey the alarm is acknowledged
1.
Press the "Program control" and "Alarm" softkeys.
The "Simulation Alarms" window is opened and a list of all pending
alarms is displayed.
Press the "Acknowledge alarm" softkey to reset the simulation alarms
indicated by the Reset or Cancel symbol.
The simulation can be continued.
- OR -
Press the "Simulation Power On" softkey to reset a simulation alarm
indicated by the Power On symbol.
The simulation is terminated and loaded again.
Meaning
Cancel symbol
Reset symbol
Power On symbol
Simulating machining
5.9 Displaying simulation alarms
167
Advertisement
Table of Contents
