Logbook - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
20.7
Logbook
The logbook provides you with the machine history in an electronic form.
If service is carried out on the machine, this can be electronically saved. This means that it is
possible to obtain a picture about the "History" of the control and to optimize service.
Editing the logbook
You can edit the following information:
● Editing information on the machine identity
● Make logbook entries (e.g. "filter replaced")
Output of the logbook
You have the possibility of exporting the logbook by generating a file using the "Save
version" function in which the logbook is contained as section.
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Select the following via a checkbox:
• Version data: Output of pure version data in text format.
• Configuration data: Output of configuration data in XML format.
The configuration file contains the data you entered under Machine
identity, the license requirements, the version information and the
logbook entries.
5.
Press the "OK" softkey to start the data transfer.
– Machine name/No.
– Machine type
– Address data
Alarms, error messages, and system alarms
20.7 Logbook
479
Advertisement
Table of Contents
