Siemens SINUMERIK 828D Operating Manual page 189

Programming graphics
The programming graphics show the contour of the workpiece as a dynamic graphic with
dotted lines. The program block selected in the machining schedule is highlighted in color in
the programming graphics.
Figure 7-2
Parameter screen with help display
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Programming graphics of a ShopMill program
Press the <Cursor right> or <Input> key to open a selected
program block or cycle in the work plan.
The associated parameter screen with help screen is then
displayed.
Creating a ShopMill program
7.1 Program views
189