Creating A Directory/Program/Job List/Program List; Creating A New Directory - Siemens SINUMERIK 828D Operating Manual

12.4

Creating a directory/program/job list/program list

12.4.1

Creating a new directory

Directory structures help you to manage your program and data transparently. You can
create subdirectories in a directory on the local drive and on USB network drives.
In a subdirectory, in turn, you can create programs and then create program blocks for them.
Note
Directory names must end in .DIR or .WPD. The maximum name length is 28 characters
including the extension.
All letters (except accented characters), numbers, and underscores are permitted for name
assignment. These names are automatically converted to upper-case letters.
This limitation does not apply for work on USB/network drives.
Procedure
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
1. Select the "Program manager" operating area.
2. Select your chosen storage medium, i.e. a local or USB drive.
3. If you want to create a new directory in the local network, place the
cursor on the topmost folder and press the "New" and "Directory"
softkeys.
The "New Directory" window appears.
4. Enter the desired directory name and press the "OK" softkey.
12.4 Creating a directory/program/job list/program list
Program management
393