Siemens SINUMERIK 828D Operating Manual page 213

HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Measure workpiece
- OR -
Calibrate workpiece probe
- OR -
Measure tool
4. Using a vertical softkey, select a measurement task.
5. Enter the parameters into the measuring cycle screen.
6. Press the "OK" softkey.
The measuring cycle is transferred into the editor as G code. The
measuring cycle parameterized in the G code is color coded.
7. Position the cursor on a measuring cycle in the G code editor, if you
want to display the associated parameter screen form again.
8. Press the <Cursor right> key.
The parameter screen for the selected measuring cycle appears.
- OR -
9. Press the <Shift> + <Insert> keys to remove the measuring cycle
selection in the editor and to be able to directly change the parameters
in the editor.
Creating a ShopMill program
7.16 Measuring cycle support
213