Logging An Active User On And Off - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Easy Message
16.5 Logging an active user on and off
16.5
Logging an active user on and off
Only active users receive an SMS message for the specified events.
You can activate users, already created for Easy Message, with certain control commands
via the user interface or via SMS.
Procedure
436
The connection has been established to the modem.
1.
Press the "User profiles" softkey.
2.
Select the desired user in the User name field and press the "User
active" softkey
Note
Repeat step 2 to activate further users.
- OR -
Send an SMS with the User ID and the "activate" text to the control
(e.g. "12345 activate")
If the telephone number and the user ID match the stored data, the
user profile is activated.
You receive a message of success or failure per SMS.
3.
Press the "User active" softkey to log off an activated user.
- OR -
Send an SMS with the "deactivate" text (e.g. "12345 deactivate") to
log off from the Messenger.
An SMS message is not sent to the deactivated user for the events
specified in the user profile.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling
Advertisement
Table of Contents
