Siemens SINUMERIK 828D Operating Manual page 190

Creating a ShopMill program
7.1 Program views
Figure 7-3
The animated help displays are always displayed with the correct orientation to the selected
coordinate system. The parameters are dynamically displayed in the graphic. The selected
parameter is displayed highlighted in the graphic.
The color symbols
Red arrow = tool traverses in rapid traverse
Green arrow = tool moves with the machining feedrate
Parameter screen with programming graphics
190
Parameter screen with help display
In the screen, you can toggle between the help display and the
program graphics using the "Graphic view".
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling