Siemens SINUMERIK 828D Operating Manual page 23

Key
<Return> / <Enter>
<Space>
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Function
<INSERT>
When you press <INSERT>, you go into the edit mode and when you
•
press it again, the edit mode is exited and you go into the navigation
mode.
<INPUT>
Finish the entry of a value in the input field.
•
Open a directory or program.
•
<ALARM> - only OP 010 and OP 010C
Calls the "Diagnosis" operating area
<PROGRAM> - only OP 010 and OP 010C
Calls the "Program Manager" operating area.
<OFFSET> - only OP 010 and OP 010C
Calls the "Parameter" operating area.
<PROGRAM MANAGER> - only OP 010 and OP 010C
Calls the "Program Manager" operating area.
Menu back key
Jump to the next highest menu level.
<MACHINE>
Open the "Machine" operating area.
Menu forward key
Advance the horizontal softkey bar.
<MENU SELECT>
Call the main menu for operating area selection.
Accepts the entered value and moves the cursor into the next line/cell.
This changes a checkbox.
Introduction
1.2 Operator panel fronts
23