All G Functions - Siemens SINUMERIK 828D Operating Manual

References
For more information about configuring the displayed G groups, refer to the following
document:
HMI sl / 840D sl Commissioning Manual
4.11.2

All G functions

All G groups and their group numbers are listed in the "G Functions" window.
Within a G group, only the G function currently active in the controller is displayed.
Additional information in the footer
The following additional information is displayed in the footer:
● Current transformations
Display
TRANSMIT
TRACYL
TRAORI
TRAANG
TRACON
● Current zero offsets
● Spindle speed
● Path feedrate
● Active tool
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
4.11 Displaying G Functions and Auxiliary Functions
Meaning
Polar transformation active
Cylinder transformation active
Orientation transformation active
Inclined axis transformation active
Cascaded transformation active
For TRACON, two transformations (TRAANG and TRACYL or TRAANG and
TRANSMIT) are activated in succession.
Machining the workpiece
149