Setting Up Drives; Overview - Siemens SINUMERIK 828D Operating Manual

Setting up drives

13.1

Overview

Set up connections
Up to 8 connections to so-called logical drives (data carriers) can be configured in HMI sl.
These drives can be accessed in the "Program manager" and "Startup" operating areas.
The following logical drives can be set up:
● USB interface
● CompactFlash Card of the NCU, only for HMI sl in the NCU
● Network drives
● Hard disk of the PCU 50.3, only for so-called external HMI sl.
Note
It is not possible to configure NCU interfaces.
13.2 Setting up drives
The "Set-up drives" window is available in the "Startup" operating area for configuration.
File
The created configuration data is stored in the "logdrive.ini" file. This file is located in the
/user/sinumerik/hmi/cfg directory.
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Software options
• To use the CompactFlash Card as data carrier you require the "Additional 256
MB HMI user memory on CF card of NCU" option.
13
415