Siemens SINUMERIK 828D Operating Manual page 21
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Key
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Function
<Cursor up> + <CTRL>
+
Edit mode:
•
Moves the cursor upwards by one word.
Navigation mode:
•
–
–
<Cursor up> + <SHIFT>
+
Moves the cursor one paragraph upwards.
<Cursor down>
Edit mode:
•
Moves the cursor downwards.
Navigation mode:
•
–
–
<Cursor down> + <CTRL>
+
Edit mode:
•
Moves the cursor downwards by one word.
Navigation mode:
•
–
–
<Cursor down> + <SHIFT>
+
Moves the cursor one paragraph downwards.
<SELECT>
Selects a listed value. Sets the value to "true".
<END>
Moves the cursor to the last entry field in a menu screen or a table.
<END> + <SHIFT>
+
Moves the cursor to the last entry.
<END> + <CTRL>
+
Moves the cursor to the last entry in the last line of the actual column.
<BACKSPACE>
Edit mode:
•
Deletes a character selected to the left of the cursor.
Navigation mode:
•
Deletes all of the selected characters to the left of the cursor.
<BACKSPACE> + <CTRL>
+
Deletes a word selected to the left of the cursor.
<TAB>
Indent the cursor by several characters.
<TAB> + <CTRL>
+
Moves the cursor to the right in the next cell. In so doing, also changes
into the next line to the lefthand cell.
Moves the cursor in a table to the beginning of the table.
Moves the cursor in a menu screen to the beginning of the line.
Moves the cursor in a table to the next cell downwards.
Moves the cursor in a menu screen downwards.
Moves the cursor in a table to the end of the table.
Moves the cursor in a menu screen to the end of a line.
Introduction
1.2 Operator panel fronts
21
Advertisement
Table of Contents
