Tool management
11.12 Changing a tool type
11.12
Changing a tool type
Procedure
...
384
5.
Press the "Cutting edge data" softkey to directly go to the "Cutting
edge data" column.
6.
Press the "Monitoring data" softkey to go directly to the "Monitoring
data" column.
1.
The tool list, the wear list, the OEM tool list or the magazine is
opened.
2.
Position the cursor in the column "Type" of the tool that you wish to
change.
3.
Press the <SELECT> key.
The "Tool types - Favorites" window opens.
4.
Select the desired tool type in the list of favorites or select using the
softkeys "Cutters 100-199", "Drills 200-299" or "Special tools 700-
900".
5.
Press the "OK" softkey.
The new tool type is accepted and the corresponding icon is displayed
in the "Type" column.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling