Siemens SINUMERIK 828D Operating Manual page 36
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Introduction
1.4 User interface
Procedure
Changing or calculating parameters
If you only want to change individual characters in an input field rather than overwriting the
entire entry, switch to insertion mode. In this mode, the pocket calculator is also active. You
can use it during programming to calculate parameter values.
...
36
1.
Keep pressing the <SELECT> key until the required setting or unit is
selected.
The <SELECT> key only works if there are several selection options
available.
- OR -
Press the <INSERT> key.
The selection options are displayed in a list.
2.
Select the required setting using the <Cursor down> and <Cursor up>
keys.
3.
If required, enter a value in the associated input field.
4.
Press the <INPUT> key to complete the parameter input.
Press the <INSERT> key.
Insertion mode and the pocket calculator are activated.
You can navigate within the input field using the <Cursor left> and <Cursor
right> keys.
Use the <BACKSPACE> and <DEL> key to delete individual characters.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling
Advertisement
Table of Contents
