Displaying Plc Properties - Siemens SINUMERIK 828D Operating Manual

Ladder add-on tool

19.4 Displaying PLC properties

Shortcuts
19.4 Displaying PLC properties
The following PLC properties can be displayed in the "SIMATIC LAD" window:
● Operating mode
● Name of the PLC project
● PLC system version
● Cycle time
● Machining time of the PLC user program
Procedure
450
Action
Open the previous program block in the same window
+
The function of the Select key depends on the position of the input
focus.
•
•
•
If the input focus is positioned on a command, all operands including
the comments are displayed.
1. Select the "Start-up" operating area.
2. Press the "PLC" softkey.
The ladder diagram display opens and displays the PLC information.
3. Press the "Reset mach. time" softkey.
The data of the machining time is reset.
Table line: Displays the complete text line
Network title: Displays the network comment
Command: Displays all operands
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling