Siemens SINUMERIK 828D Operating Manual page 146

Machining the workpiece
4.10 Editing a program
Settings
Display hidden lines
Display block end as
an icon
Scroll horizontally
Automatic save (only
local and external
drives)
Note
All entries that you make here are effective immediately.
Procedure
146
Meaning
Hidden lines marked with "*HD" (hidden) will be displayed.
The "CFLF" (line feed) symbol ¶ is displayed at the block end.
A horizontal scrollbar is displayed. In this way, you can scroll horizontally to
the end of long lines that would otherwise wrap.
Yes: The changes are saved automatically when you change to another
operating area.
No: You are prompted to save when changing to another operating area.
Save or reject the changes with the "Yes" or "No" softkeys.
1. Select the "Program" operating area
You have activated the editor.
2. Press the ">>" and "Settings" softkeys.
The "Settings" window appears.
3. Make the desired changes here and press the "OK" softkey to confirm
your settings.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling