Creating a ShopMill program
7.8 Defining machine functions
7.8
Defining machine functions
You can switch-on the coolant or stop machining between the individual machining steps.
Procedure
See also
Starting and stopping a spindle manually (Page 107)
Table 7- 1
Parameter
Stop position
Other M function
Coolant 1
Coolant 2
Tool-spec. function 1
200
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
1.
The ShopMill program to be edited has been created and you are in
the editor.
2.
Press the menu forward key and the "Straight Circle" softkey.
3.
Press the "Machine functions" softkey.
The "Machine functions" window opens.
4.
Enter the desired parameters.
5.
Press the "Accept" softkey.
Description
Spindle M function, defines the spindle direction of rotation or spindle position
Spindle off
•
Spindle rotates clockwise
•
Spindle rotates counterclockwise
•
Spindle positions
•
Spindle stop position - (only for spindle M function SPOS)
Machine functions, e.g. "Close door" that are additionally provided by the
machine manufacturer.
Selects coolant (switches coolant 1 on or off)
with
•
without
•
Selects coolant (switches coolant 2 on or off)
with
•
without
•
User machine functions on/off
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Unit
Degrees
HMI sl Milling