Siemens SINUMERIK 828D Operating Manual page 94
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Setting up the machine
2.7 Work offsets
Note
Settings for rotation, scaling and mirroring are specified here and can only be changed here.
Procedure
...
These value changes are available in the part program immediately or after "Reset".
94
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "Active", "Base" or "G54...G599" softkey.
The corresponding window appears.
4.
Place the cursor on the desired work offset to view its details.
5.
Press the "Details" softkey.
A window opens, depending on the selected work offset, e.g. "Work
Offset - Details: G54 to G599".
6.
You can edit the values directly in the table.
- OR -
Press the "Clear offset" softkey to reset all entered values.
Press the "WO +" or "WO -" softkey to select the next or previous
offset, respectively, within the selected area ("Active", "Base", "G54 to
G599") without first having to switch to the overview window.
If you have reached the end of the range (e.g. G599), you will switch
automatically to the beginning of the range (e.g. G54).
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling
Advertisement
Table of Contents
