Specifying The Number Of Workpieces - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
7.11
Specifying the number of workpieces
If you want to produce a certain number of the same kind of workpiece, you can input the
desired quantity at the program end. When you start the program, the program will be
executed for as many times as you specified.
Procedure
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
8.
Enter the names of the start and end markers and the number of times
the blocks are to be repeated.
9.
Press the "Accept" softkey.
The marked program blocks are repeated.
1.
Open the "Program end" block, if you want to machine more than one
workpiece.
2.
Enter the number of workpieces that you want to machine in field "N".
- OR -
Press the "Infinite" softkey if you wish to repeat the program execution
for an unlimited number of times.
You can abort the program execution with "Reset."
3.
Press the "Accept" softkey.
When you later start the program, the program will be executed for as
many times as you specified.
Creating a ShopMill program
7.11 Specifying the number of workpieces
203
Advertisement
Table of Contents
