Alarms, error messages, and system alarms
20.6 Version
20.6.2
Save information
All the machine-specific information of the controller is combined in a configuration via the
user interface of the HMI sl. You can save machine-specific information on the drives that
have been set-up.
Procedure
478
4.
Press the "Details" softkey, in order to receive more exact information
on the components displayed.
1.
Select the "Diagnostics" operating area.
2.
Press the "Version" softkey.
It takes some time to call the version display. While the version data is
being determined a progress message box and the appropriate text
are displayed in the dialog line.
3.
Press the "Save" softkey.
The "Save Version Information: Select archive" window opens. The
following storage locations are offered depending on the configuration:
• Local drive
• Network drives
• USB
• Version data (archive: Data tree in the HMI data directory)
4.
Press the "OK" softkey.
The "Save Version Information: Name" window opens. The following
options are available:
• In the "Name:" text field, The file name is pre-assigned with
<Machine name/no.>+<CF-card number>. "_config.xml" or
"_version.txt" is automatically attached to the file names.
• In text field "Comment", you can add a comment, which is stored
with the configuration data.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling